LED Replacement For PL Lamps, Incandescent and CFL Bulbs

03/21/12 | Copyright Synergy Lighting USA | Call us today for sales and pricing information: Toll Free: 1-877-220-5483

Often with the changing tides of the lighting industry, customers call us asking for a LED Lighting solution for older 2-Pin CFL and Incandescent applications.  Both incandescent as well as magnetic ballast operated compact fluorescent lamps are being phased out, this has become a serious issue.

LED REPLACEMENT FOR CFLCurrently on the market place there are many LED retrofit products such as the plug in lamp pictured here.  These products unfortunately have limited use as they are restricted by base types, and can only fit into limited fixture types.  Once the right lamp is selected for the type fixture, the lamp relies on typically old worn out sockets which often make for poor electrical connections.  As well, these type LED replacement lamps generate a lot of heat which can melt sockets, or pose a risk of fire.  Lastly, where dimming is a requirement, this type LED has no options, and therefore become a bad recommendation for commercial use.  Fortunately, there is now a true LED Solution!

Universal LED Replacement For PL Lamps, CFL Lamps and Incandescent Light Bulbs

TERRALUX LED RETROFIT MODULEIn 2011, Synergy Lighting participated in the Commercial Use Input to the R&D Department of TerraLUX LED Lighting.  Through this input from Synergy Lighting and other Lighting Experts, TerraLUX LED has developed a true universal replacement module for PL and Incandescent Light Fixtures.  This module adaptively can replace any type of PL lamp from 2-Pin to 4-pin models and eliminates the need for PL Lamp sockets and ballasts, as well as screw based CFL and incandescent lamps.

The TerraLUX LED Module comes complete with a universal mounting hardware kit that installs in less than 5 minutes in virtually any type of fixture, is UL Listed and IP65 Rated for Indoor and Outdoor use.   The adaptive hardware can mount vertically, horizontally, facing upward, downward or outward from any fixture!  At only 8 watts, the 4″ LED Module is smaller than a 26Watt PL lamp and has the same light output.  Therefore you can replace any 26 Watt Lamp, or a combination of (2) 13 watt PL Lamps, or a 60 Watt Incandescent  in fixtures such as Wall Sconces, Recessed Fixtures, Rectangular Floods, Step Lights, Cove Lighting, and many more!

TerraLUX – Best LED Replacement For Commercial Use

REPLACE CFL PL LAMPS WITH LED RETROFITThe TerraLUX Modules, are available in both 120 and 277 Voltages, and where applicable are pre-wired for 0-10v Dimming circuits.  These LED Modules come in 8 Watt-4 Inch, 11 Watt-6 Inch, and 13 Watt-8 Inch configurations , and offer an optional clip on diffuser for sensitive lighting applications.   Precise 85CRI Color temperatures include 2700K, 3000K, 3500K and 4000K.  Because the milli-amps required to operate these LED’s are low, junction temperatures stay within peak performance ranges.  To completely eliminate heat degradation, the TerraLUX module comes with a thermal pad that unifies the module to the fixture body for additional thermal sinking.  This makes the TerraLUX Module the most diverse, and universally adaptive 60,000 hour LED Lighting product on the market for use in all commercial applications!

call now to order!

TERRALUX LED MODULE SPEC SHEET  TERRALUX IES FILES

For more information or to purchase the TerraLUX LED Modules, visit our website http://synergylightingusa.com or call us toll free 1-877-220-5483.

Currently there are no comments related to this article. You have a special honor to be the first commenter. Thanks!

Leave a Reply