Occupancy Sensors Save Electricity | Leviton | Energy Savings

06/18/10 | Copyright Synergy Lighting USA | Call us today for sales and pricing information: Toll Free: 1-877-220-5483

Energy conservation is rapidly being realized as a viable way to cut expenses and add positive cash flow to any business or home budget. In the growing popularity of Compact Fluorescent Lamps and LED Light bulbs, one other great investment is Occupancy Sensors. Lighting is typically the single largest users of electricity in a commercial building. Occupancy Sensors, commonly referred to as an “Occ Sensor” are installed to turn lighting on when a person approaches or enters a room, and have a built in, programmable time delay to turn the lighting circuit off after a brief period of time. Over the past few years, this technology has changed to incorporate a wide variety of sensors for use in many residential and commercial applications.

Occupancy Sensors Save ElectricityOne of the biggest drawbacks in years past was the use in commercial bathrooms. If a bathroom stall was in use, the partitions would block the sensor from detecting that there was an occupant in the restroom, and the lights may turn out while the bathroom is still in use. Often perople would find themselves waving a hand over the stall door to try and activate the sensor again. This problem has been rectified with the creation of a “Nocc Sensor”, or Noise and Heat Activated Switch. The Nocc Sensor has a decibel rated noise sensor capable of detecting so much as a murmur or footstep, preventing it from turning off even if direct view of an occupant is blocked.

Where should you use an Occupancy Sensor?

Residential: Occupancy sensors should be used in areas that are not normally occupied for extended periods of time. Use of an occupancy sensor in a Bathroom, Closet, Garage, Laundry Room and other low use areas can provide added sensor of luxury with hands free switching as well as ensuring non priority lights do not remain on when not in use.  Children often leave these lights on, so the use of the occupancy sensor corrects bad habits affordably.

Commercial: We recommend a (2) Visit Rule. Besides Bathrooms which are an almost given in a commercial building, the two visit rule is the best way to judge Occ Sensor usage. How this rule works is simple. Perform a walk through inspection of your facility. If you enter a space, room or area that lights are on and no one is occupying that space at any two given times during your walk through, it is likely a great place to install an occupancy sensor. Primary considerations should be placed in:

  • Independent Offices where the user works in and out regularly
  • Warehouse Isles and Back Room Areas
  • Conference, Meeting Rooms
  • Storage or Supply Areas
  • Bathrooms
  • Stair Wells and Corridors

How much electricity is saved by an occupancy sensor?

Saving electricity by use of an occupancy sensor is very hard to calculate precisely, but should result in a 50%-90% reduction in usage. The following example should help you understand the principle. If a bathroom uses (3) 2×4 fluorescent fixtures is left on during an 8 hour day, the cost of electricity is approximately $112.93 per year. By installing an Occupancy Sensor (Average cost $30.00) the lights in the bathroom may be cut down to as low as 1.5 hours per day. The resulting savings would be $91.76 per year. Times an average switch life of 10 years is equal to a positive cash flow of $917.60. Return on investment is an average of 4.2 months. By using Occupancy sensors in multiple areas, a business can reduce its electricity expenses measurably.

 

For more information on using Occupancy Sensors  view our website  or call Synergy Lighting for a free consultation and walk through.

 

Phone: (941)-756-4844

Toll Free: (877) 220-5483

e-mail: sales@synergylightingusa.com

 NEMA Case Study – Occupancy Sensors

Share/Bookmark

6 COMMENTS

1 [Blocked by CFC] Autism Symptoms
18:13:47, 20/07/10

Great site. A lot of useful information here. I’m sending it to some friends!

2 Matt Gregg
20:57:21, 20/07/10

Thank you, It is one of our primary goals to make sure our customers and potential customers have all the knowledge they need to make wise buying descisions, especially when it comes to saving money through costs, labor and energy savings!

3 Fred
01:12:28, 21/07/10

Great site with lots of information. I will share this with friends!

4 MattGregg
01:15:06, 21/07/10

Thank You. We pride ourselves on educating our clients or potential consumers so that they can make great cost effective, and energy wise decisions on the products they buy or use. We appreciate your feedback.

5 Occupancy Sensors
09:31:00, 07/04/11

Common Facility staff will only be able to determine the best areas to install occupancy sensors by using lighting loggers or random surveys about room/area occupancy. Commissioning and calibration of lighting controls are essential if energy savings are to be achieved and maintained.

6 solar birmingham
06:14:00, 23/08/11

A variety of energy saving technologies are combined with efficient architecture in green homes. Some of these technologies, including compact fluorescent light bulbs and energy efficient appliances, simply replace older less efficient technologies.Thanks for sharing such smart article with us.Keep sharing in future too.

You must be logged in to post the comment!