LED Replacement For PL Lamps, Incandescent and CFL Bulbs

21/03/12 0 COMMENTS

Often with the changing tides of the lighting industry, customers call us asking for a LED Lighting solution for older 2-Pin CFL and Incandescent applications. Both incandescent as well as magnetic ballast operated compact fluorescent lamps are being phased out, this has become a serious issue.

LED REPLACEMENT FOR CFLCurrently on the market place there are many LED retrofit products such as the plug in lamp pictured here. These products unfortunately have limited use as they are restricted by base types, and can only fit into limited fixture types. Once the right lamp is selected for the type fixture, the lamp relies on typically old worn out sockets which often make for poor electrical connections. As well, these type LED replacement lamps generate a lot of heat which can melt sockets, or pose a risk of fire. Lastly, where dimming is a requirement, this type LED has no options, and therefore become a bad recommendation for commercial use. Fortunately, there is now a true LED Solution!

Universal LED Replacement For PL Lamps, CFL Lamps and Incandescent Light Bulbs

TERRALUX LED RETROFIT MODULEIn 2011, Synergy Lighting participated in the Commercial Use Input to the R&D Department of TerraLUX LED Lighting. Through this input from Synergy Lighting and other Lighting Experts, TerraLUX LED has developed a true universal replacement module for PL and Incandescent Light Fixtures. This module adaptively can replace any type of PL lamp from 2-Pin to 4-pin models and eliminates the need for PL Lamp sockets and ballasts, as well as screw based CFL and incandescent lamps.

The TerraLUX LED Module comes complete with a universal mounting hardware kit that installs in less than 5 minutes in virtually any type of fixture, is UL Listed and IP65 Rated for Indoor and Outdoor use. The adaptive hardware can mount vertically, horizontally, facing upward, downward or outward from any fixture! At only 8 watts, the 4″ LED Module is smaller than a 26Watt PL lamp and has the same light output. Therefore you can replace any 26 Watt Lamp, or a combination of (2) 13 watt PL Lamps, or a 60 Watt Incandescent in fixtures such as Wall Sconces, Recessed Fixtures, Rectangular Floods, Step Lights, Cove Lighting, and many more!

TerraLUX – Best LED Replacement For Commercial Use

REPLACE CFL PL LAMPS WITH LED RETROFIT

The TerraLUX Modules, are available in both 120 and 277 Voltages, and where applicable are pre-wired for 0-10v Dimming circuits. These LED Modules come in 8 Watt-4 Inch, 11 Watt-6 Inch, and 13 Watt-8 Inch configurations, and offer an optional clip on diffuser for sensitive lighting applications. Precise 85CRI Color temperatures include 2700K, 3000K, 3500K and 4000K. Because the milli-amps required to operate these LED’s are low, junction temperatures stay within peak performance ranges. To completely eliminate heat degradation, the TerraLUX module comes with a thermal pad that unifies the module to the fixture body for additional thermal sinking. This makes the TerraLUX Module the most diverse, and universally adaptive 60,000 hour LED Lighting product on the market for use in all commercial applications!

 

call now to order!

TERRALUX LED MODULE SPEC SHEET  TERRALUX IES FILES

 

For more information or to purchase the TerraLUX LED Modules, visit our website http://synergylightingusa.com or call us toll free 1-877-220-5483.

Optec LED Lighting Retrofit For HID Lighting

15/07/11 0 COMMENTS

As a leader in the lighting industry Synergy Lighting is always on the look out for innovative led lighting solutions that work as effectively as they are energy efficient. Occasionally we find products that exceed our expectations. Not only did we find an innovative product that outperform competing brands on lumens per watt, but also has an extremely affordable cost to the end-user. As Florida’s preferred distributor we proudly introduce Optec LED.

Synergy Lighting Introduces Optec LED Lighting Systems

Optec LED Lighting Systems retrofit several types of the most popular LED fixtures such as Parking Lot Lighting, Canopy Lighting, and Street Lighting Cobra Heads. With one of the most low profile and IP65 Outdoor Wet-Location Rated Enclosures, the Optec LED Lighting system delivers clear high performance, with affordability.

Optec Led Lighting Retrofit Fixture Sarasota Bradenton Clearwater Naples FT Myers FLorida

Optec LED Lighting Systems use exclusively the latest in Nichia 219 LED Lighting technology. Nichia 219 white LED offers superior 140 lumen per watt with 5,000K Natural White Illumination and the Highest Levels of Color Rendering. Using a uniformly phosphor coated chip, Optec LED Retrofits provide the industry leading source brightness and tightest optical footprint. The spatial color uniformity is also optimized with leading phosphor technology and thermally managed by Optec’s patented sure-cool aluminum housing.

Quick and Easy LED Retrofit Install

OPTEC LED LIGHTING COBRA HEAD

Optec LED Lighting retrofits and fixtures were designed to not only produce superior light output, but to be the easiest to install. The Prorprietary LED Cobra Head is an excellent choice for municipality and street lighting. For commercial clients, there is no need for custom made brackets and mounting hardware as Optec has a full line of manufactured installation kits ready for any installation. The design is flexible, to accommodate retrofit of virtually any shoebox or canopy light fixture and offers many benefits including long life and fast ROI.

Features of Optec LED Lighting Retrofits

  • Patented individual LED thermal management eliminates heat and enhances overall  performance
  • Custom designed lenses and light pattern engineered to yield maximum light distribution
  • Removable LED plate
  • Long life span – up to 50,000 hours
  • Detachable weatherproof power supply
  • IP65/NEMA 4X environmental fixture design
  • Lightweight pole/ceiling mount
  • Energy-saving – requires 75%-90% less power than typical HID lamps
  • Optional hardware/software dimming control

LED GAS STATION CANOPY LIGHT FIXTURE - OPTEC LED LIGHTNG

 

Optec Lighting The Smart Choice

Optec LED Lighting C0820 Area Light 

Optec C0820 Adjustable Canopy

Optec LED C0820 Canopy Light 

Optec LED Cobra Head Street Light 

 

Synergy Lighting is Florida’s #1 trusted source for LED Lighting and a preferred distributor for Optec LED Lighting Systems. For more information on switching to Optec LED Lighting or pricing, view our website and call Synergy Lighting for a free consultation.

 

Phone: (941)-756-4844

Toll Free: (877) 220-5483

e-mail: sales@synergylightingusa.com

Share/Bookmark

LED Bullet Landscape Lighting Fixtures

19/01/11 2 COMMENTS

One of the most accentuating aspects of commercial outdoor lighting is landscape lighting. Illuminating landscape features such as shrubs, trees, and plants can transform a property from ordinary into extraordinary! In additional to enhancing the image of a property, a quality landscape lighting design can add safety and security to a property with increased ambient light levels around walkways and paths.

LED Landscape Lighting Fixtures Replace Metal Halide

RETROFIT METAL HALIDE TO LEDOne of the most popular forms of commercial landscape lighting is incandescent and HID lighting such as Metal Halide. These flood fixtures are often expensive to operate, and have higher levels of required maintenance. Though they provide a great degree of brightness, the overall costs can often deter a property owner from maintaining them. Fortunately with the current advances in technology and receding cost of LED lighting, the days of spending thousands in electricity and hundreds in labor and replacement bulbs are over. Synergy Lighting offers a complete line of line voltage LED Bullet style landscape lighting fixtures that can easily replace any incandescent or HID Metal Halide flood fixture.

LED Lighting Fixtures Save Energy

LED provides a sharper brilliant white light, runs cooler and last up to 4 times longer than HID, and 30 times longer than halogen. Synergy’s line of LED Bullet landscape fixtures utilize CREE brand LED and are available from 8 watt (Replaces 50 Watt Halogen) up to to 20 Watt (Replaces up to 100 Watt Metal Halide). Sizes range from PAR20 to PAR38 for larger applications. LED Bullet Landscape Lighting FixtureAnnual energy savings for the 20 watt LED fixture is $64.00 a year per fixture, and has an initial cost equal to leading brand HID fixtures. Upgrading your existing HID system to LED is easy with a quick change using the 1/2″ adjustable knuckle mount built into the base of the fixture. The die-cast housing provides long term durability against abuse from landscape maintenance and comes standard with a tempered glass lens. Finishes include both Bronze and Verde Green to match the most common landscape designs. Color temperatures include 3000K Warm White, 3500K Neutral White and 5000K Natural White.

LED BULLET LANDSCAPE LIGHT FIXTURE SARASOTA BRADENTON CLEARWATER

 

For more information on  LED Lighting, view our website and call Synergy Lighting for a free consultation. Our expert staff is standing by to assist you in selecting the best LED products for your application!

 

Phone: (941)-756-4844

Toll Free: (877) 220-5483

e-mail: sales@synergylightingusa.com

Share/Bookmark