LED Retrofit for 250W Metal Halide or High Pressure Sodium Lights

10/12/12 0 COMMENTS

Across the United States, many commercial properties and municipalities are converting their existing Metal Halide Fixtures to LED. In the past this required a complete fixture replacement because there simply was no other alternative. The upfront costs associated with this type of fixture change is high but does result in tremendous energy savings and labor savings. Fortunately, the need for a complete fixture change is no longer required as Synergy Lighting introduces two of the most efficient LED Retrofit Lamps on the market. These LED replacements for 250 Watt Metal Halide not only offers the same life as more expensive LED fixtures, but are extremely affordable at less than half the cost!RETROFIT 250 WATT METAL HALIDE TO LED REPLACEMENT LED BULB FOR LIGHT FIXTURES HIGH BAY

Universal Position 100 Watt LED Replacement Bulb

Utilizing only 100 Watts of consumable energy, the LED-8027-DL Light Bulb easily replaces up to 250w Watt Metal Halide bulbs in Roadway, Street Lights, Wall Packs, Post Lights and Garage Lighting Fixtures. This LED Retrofit results in an energy saving of $1,614.00 per fixture*. Installation is quick and simple with the LED-8027-DL. Simply remove the existing metal halide from the light fixture and bypass the HID ballast. Then screw in this multi-volt (110v-277v) retrofit lamp. The omni-direction LED array emits light in 360 degrees. Additionally the LED-8027-DL has a built in integral 70,000 hour cooling fan that provides additional thermal management. This feature ensures proper LED junction temperatures are controlled in a fully enclosed fixture. (Please note: Removal of the original HID Ballast from the existing fixture may be required for utility incentives, consult with your local utility).

100 WATT LED REPLACEMENT FOR 250 WATT METAL HALIDE - UNIVERSAL LED BULB

  • 100 Watt Universal Position LED Array
  • Universal Voltage 110V-277V
  • 5700 Kelvin – Bright White Light
  • 8900 Photopic Lumens / 11,150 Scotopic Lumens
  • 50,000 Hour Life In Enclosed Fixtures
  • 12 Years Life @ 12 Hours Use Per Day
  • 70,000 Hour On Board Delta Cooling Fan
  • Mogul Base
  • UL Listed LED Lighting Retrofit
  • LM79 Tested by ITT Boulder
  • 5 Year Factory Warranty
  • Diameter: 4.92 Inches x Length: 11.93 Inches

 

Base-Up 100 Watt LED Replacement Bulb

Utilizing only 100 Watts of consumable energy the LED-8026 Down-light Bulb is the latest in Energy Efficient LED Retrofits. This unique and specially engineered lamp is the perfect replacement for up to 175 watt Metal Halide in fixtures that have vertically mounted lamps such as Street Lights, Parking Garage Fixtures, Low Bay’s and Shoeboxes. Energy Savings with this LED Retrofit yields up to $1590.00 per fixture*. Equipped with a vented prismatic lens, the LED-8026 creates a perfected distribution of light both downwards and outwards without glare that could hinder drivers from becoming distracted. Replacement is easy by simply bypassing the existing HID ballast and screwing in the LED-8026. The LED-8026 is also equipped with a 70,000 hour internal cooling fan to provide thermal management for enclosed fixtures, and can by used in outdoor open-rated street light fixtures typically found in most municipalities. Its slim size fits perfectly into PGR and Gas Station Canopy Style Light Fixtures, and can work with occupancy control systems.

100 WATT LED REPLACEMENT FOR 250 WATT METAL HALIDE - HIGH BAY - GARAGE LIGHT LED

  • 100 Watt Base Up LED Prismatic Diffuse Array
  • Universal Voltage 110V-277V
  • 5700 Kelvin – Bright White Light
  • 8300 Photopic Lumens / 10400 Scotopic Lumens
  • 50,000 Hour Life In Enclosed Fixtures
  • 12 Years Life @ 12 Hours Use Per Day
  • 70,000 Hour On Board Cooling Fan
  • Medium Base (Mogul Base Adapter Available)
  • UL Listed LED Lighting Retrofit
  • LM79 Tested by ITT Boulder
  • 5 Year Factory Warranty
  • Diameter: 7.15 Inches x Depth: 8.15 Inches

 

 

For more information on switching to LED Lighting or pricing, view our website and call Synergy Lighting for a free consultation.

 

Phone: (941)-756-4844

Toll Free: (877) 220-5483

e-mail: sales@synergylightingusa.com
Share/Bookmark

* Energy Savings Based on $0.13 per KW at 50,000 hours. Utility Rates May Vary

Retrofit HID High Bay Fixtures to LED with Xeralux XLE-HB LED Kit

03/02/11 2 COMMENTS

turning out the lightsBY now most industrial and commercial end users of HID High Bay Fixtures are well aware of the extremely high costs of operation. We see this evident in larger commercial warehouses and distribution centers where the management often turns out the lights to avoid the high electric bills. Although the intention of creating energy savings is good, this often creates hazards associated with poor lighting such as employee safety, reduced security and increased production flaws. Obviously the original lighting was installed by necessity with intended design lumen’s for visual tasks employed within a facility.

Where Fluorescent High Bays Fall Short

In years past the only alternative was linear T8 and T5 Fluorescent high bays. These fixtures offer tremendous initial cost savings and yield very high returns on investment (ROI).  Synergy Lighting agrees that the T8 and T5 fixtures definitely have their place in commercial lighting. However there are distinctive disadvantages to replacing HID fixtures with fluorescent. These shortcomings are in large installations where machinery and equipment, and work stations are installed that can impede maintenance as well as extremely large installations. In these environments, the occasional re-lamping of a facility can involve tremendous labor and lift costs, and well as the need to replace 1000’s of fluorescent bulbs, and the ever so complicated process of recycling and handling spent mercury lamps.

LED High Bay Retrofit Upgrade Kit Outperforms

XERALUX XLE-HB LED HIGH BAY RETROFIT KITXeralux, a leader in LED technologies has engineered and developed one of the strongest and most reliable LED upgrade systems for HID High bay and Low Bay Fixtures.  The introduction of their “off the shelf” XLE-HB LED Lighting System offers smooth performance, long life solid returns and quick easy installation. The design is extremely well packaged resulting in an average installation time of 15 minutes per fixture. This feature alone yields a 50% Labor savings on initial installation compared to fluorescent rivals.

The XLE-HB (Light Engine) upgrades standard high bay and low bay fixtures with any type of reflectors, turning them into energy efficient, long-lasting solid state lighting (SSL) luminaries, without the cost or hassle of purchasing new fixtures.

American Made ARRA and Energy Star Compliant

XERALUX-XLE-HB-LED-HIGH-BAY-LOW-BAY-RETROFIT-KITAs one of the easiest upgrade kits on the market, the XLE-HB system employs the latest in thermal management, remote internally mounted drivers offer superior performance and constant current to the the XLE LED Engines. The specifications though detailed should not confuse with the easiest to understand facts. The Xeralux XLE-HB is American made and thoroughly tested by third party, nationally recognized testing laboratories (NRTL) that are certified by the Department of Energy (DOE), the Environmental Protection Agency (EPA), and OSHA to test for compliance with ENERGY STAR®(ES), DesignLights Consortium, IESNA, UL/cUL, CE, IEC, IEEE, FCC and other agency standards.ARRA COMPLIANT LED LIGHTING FIXTURE

Savings Made Easy With XLE-HB LED Retrofit

The XLE-HB High Bay Retrofits can replaced Metal Halide (MH) and High Pressure sodium (HPS) fixtures from 50 Watts to 400 Watts with up to 80% energy savings and a 3 year ROI. 400 Watt Metal Halide High Bays are upgraded to the 186 Watt XLE-HB LED providing a gained energy savings of 60% which is 35% more savings than Fluorescent High Bays while requiring no re-lamping. This is an energy and maintenance savings of  $2575.00 per fixture. Warranty is made easy at 5 years for the LED Engine and 10 years on LED Drivers.

xle-hb highbay led retrofit wattage chartLED-HIGH-BAY-XERALUX-RETROFIT-XLE-HB

 

Current Installations Include:

  • Hewlett Packard Headquarters, Palo Alto, CA
  • Nikon Precision Headquarters, Belmont, CA
  • Mentor Graphics Headquarters, Fremont, CA
  • Michelin Tire Headquarters, Greensboro, SC
  • Marvell Semiconductors Headquarters, Santa Clara, CA
  • Waste Connection, Cold Canyon Facility, San Luis Obispo, CA
  • Applied Materials Headquarters, Santa Clara, CA
  • Gordon Biersch Brewery, San Jose, DA
  • Hillbrook School, Los Gatos, CA
  • Santa Clara University, Santa Clara, CA
  • University of California at Davis, Davis, CA
  • Sacramento International Airport, Sacramento, CA
  • Banner Health Good Samaritan Hospital, Phoenix, AZ

 

To learn more or purchase XLE-HB LED High Bay Retrofit, visit us online at www.synergylightingusa.com or call us toll free at 1-877-220-5483.

 

Phone: (941)-756-4844

Toll Free: (877) 220-5483

e-mail: sales@synergylightingusa.com

Share/Bookmark

<