led wall pack retrofit | Synergy Lighting

LED Retrofit for 250W Metal Halide or High Pressure Sodium Lights

10/12/12 0 COMMENTS

Across the United States, many commercial properties and municipalities are converting their existing Metal Halide Fixtures to LED. In the past this required a complete fixture replacement because there simply was no other alternative. The upfront costs associated with this type of fixture change is high but does result in tremendous energy savings and labor savings. Fortunately, the need for a complete fixture change is no longer required as Synergy Lighting introduces two of the most efficient LED Retrofit Lamps on the market. These LED replacements for 250 Watt Metal Halide not only offers the same life as more expensive LED fixtures, but are extremely affordable at less than half the cost!RETROFIT 250 WATT METAL HALIDE TO LED REPLACEMENT LED BULB FOR LIGHT FIXTURES HIGH BAY

Universal Position 100 Watt LED Replacement Bulb

Utilizing only 100 Watts of consumable energy, the LED-8027-DL Light Bulb easily replaces up to 250w Watt Metal Halide bulbs in Roadway, Street Lights, Wall Packs, Post Lights and Garage Lighting Fixtures. This LED Retrofit results in an energy saving of $1,614.00 per fixture*. Installation is quick and simple with the LED-8027-DL. Simply remove the existing metal halide from the light fixture and bypass the HID ballast. Then screw in this multi-volt (110v-277v) retrofit lamp. The omni-direction LED array emits light in 360 degrees. Additionally the LED-8027-DL has a built in integral 70,000 hour cooling fan that provides additional thermal management. This feature ensures proper LED junction temperatures are controlled in a fully enclosed fixture. (Please note: Removal of the original HID Ballast from the existing fixture may be required for utility incentives, consult with your local utility).

100 WATT LED REPLACEMENT FOR 250 WATT METAL HALIDE - UNIVERSAL LED BULB

  • 100 Watt Universal Position LED Array
  • Universal Voltage 110V-277V
  • 5700 Kelvin – Bright White Light
  • 8900 Photopic Lumens / 11,150 Scotopic Lumens
  • 50,000 Hour Life In Enclosed Fixtures
  • 12 Years Life @ 12 Hours Use Per Day
  • 70,000 Hour On Board Delta Cooling Fan
  • Mogul Base
  • UL Listed LED Lighting Retrofit
  • LM79 Tested by ITT Boulder
  • 5 Year Factory Warranty
  • Diameter: 4.92 Inches x Length: 11.93 Inches

 

Base-Up 100 Watt LED Replacement Bulb

Utilizing only 100 Watts of consumable energy the LED-8026 Down-light Bulb is the latest in Energy Efficient LED Retrofits. This unique and specially engineered lamp is the perfect replacement for up to 175 watt Metal Halide in fixtures that have vertically mounted lamps such as Street Lights, Parking Garage Fixtures, Low Bay’s and Shoeboxes. Energy Savings with this LED Retrofit yields up to $1590.00 per fixture*. Equipped with a vented prismatic lens, the LED-8026 creates a perfected distribution of light both downwards and outwards without glare that could hinder drivers from becoming distracted. Replacement is easy by simply bypassing the existing HID ballast and screwing in the LED-8026. The LED-8026 is also equipped with a 70,000 hour internal cooling fan to provide thermal management for enclosed fixtures, and can by used in outdoor open-rated street light fixtures typically found in most municipalities. Its slim size fits perfectly into PGR and Gas Station Canopy Style Light Fixtures, and can work with occupancy control systems.

100 WATT LED REPLACEMENT FOR 250 WATT METAL HALIDE - HIGH BAY - GARAGE LIGHT LED

  • 100 Watt Base Up LED Prismatic Diffuse Array
  • Universal Voltage 110V-277V
  • 5700 Kelvin – Bright White Light
  • 8300 Photopic Lumens / 10400 Scotopic Lumens
  • 50,000 Hour Life In Enclosed Fixtures
  • 12 Years Life @ 12 Hours Use Per Day
  • 70,000 Hour On Board Cooling Fan
  • Medium Base (Mogul Base Adapter Available)
  • UL Listed LED Lighting Retrofit
  • LM79 Tested by ITT Boulder
  • 5 Year Factory Warranty
  • Diameter: 7.15 Inches x Depth: 8.15 Inches

 

 

For more information on switching to LED Lighting or pricing, view our website and call Synergy Lighting for a free consultation.

 

Phone: (941)-756-4844

Toll Free: (877) 220-5483

e-mail: sales@synergylightingusa.com
Share/Bookmark

* Energy Savings Based on $0.13 per KW at 50,000 hours. Utility Rates May Vary

LED Retrofit For 175 Watt Metal Halide

11/01/12 0 COMMENTS

Across the United States, many commercial properties and municipalities are converting their existing Metal Halide Fixtures to LED. In the past this required a complete fixture replacement because there simply was no other alternative. The upfront costs associated with this type of fixture change is high but does result in tremendous energy savings and labor savings. Fortunately, the need for a complete fixture change is no longer required as Synergy Lighting introduces two of the most efficient LED Retrofit Lamps on the market. These LED replacements for 175 Watt Metal Halides not only offer the same life as more expensive LED fixtures, but are extremelyaffordable at less than half the cost!

LED RETROFIT FOR HID METAL HALIDE AND HIGH PRESSURE SODIUM BEFORE -AFTER

Universal Position 45 Watt LED Replacement Bulb

Utilizing only 45 Watts of consumable energy, the LED-8024 Light Bulb easily replaces up to 175 Watt Metal Halide bulbs in Roadway, Street Lights, Wall Packs, Post Lights and Garage Lighting Fixtures.  This LED Retrofit results in an energy saving of $1,014.00 per fixture*. Installation is quick and simple with the LED-8024.  Simply remove the existing metal halide from the light fixture and bypass the HID ballast. Then screw in this multi-volt (110v-277v) retrofit lamp. The omni-direction LED array emits light in 360 degrees. Additionally the LED-8024 has a built in integral 70,000 hour cooling fan that provides additional thermal management. This feature ensures proper LED junction temperatures are controlled in a fully enclosed fixture. (Please note: Removal of the original HID Ballast from the existing fixture may be required for utility incentives, consult with your local utility).

45 WATT LED REPLACEMENT FOR 175 WATT METAL HALIDE - UNIVERSAL LED BULB

  • 45 Watt Universal Position LED Array
  • Universal Voltage 110V-277V
  • 5700 Kelvin – Bright White Light
  • 3200 Photopic Lumens / 5150 Scotopic Lumens
  • 50,000 Hour Life In Enclosed Fixtures
  • 12 Years Life @ 12 Hours Use Per Day
  • 70,000 Hour On Board Cooling Fan
  • Medium Base and Mogul Base
  • UL Listed LED Lighting Retrofit
  • LM79 Tested by ITT Boulder
  • 5 Year Factory Warranty
  • Diameter: 7.25 Inches  x Length: 9.25 Inches

 

Base-Up 52 Watt LED Replacement Bulb

Utilizing only 52 Watts of consumable energy the LED-8025 Down-light Bulb is the latest in Energy Efficient LED Retrofits. This unique and specially engineered lamp is the perfect replacement for up to 175 watt Metal Halide in fixtures that have vertically mounted lamps such as Street Lights, Parking Garage Fixtures, Low Bay’s and Shoeboxes. Energy Savings with this LED Retrofit yields up to $993.00 per fixture*. Equipped with a vented prismatic lens, the LED-8025 creates a perfected distribution of light both downwards and outwards without glare that could hinder drivers from becoming distracted.  Replacement is easy by simply bypassing the existing HID ballast and screwing in the LED-8025. The LED-8025 is also equipped with a 70,000 hour internal cooling fan to provide thermal management for enclosed fixtures, and can by used in outdoor open-rated street light fixtures typically found in most municipalities.  Its slim size fits perfectly into PGR and Canopy Style Garage Light Fixtures, and can work with occupancy control systems.

52 WATT LED REPLACEMENT FOR 175 WATT METAL HALIDE - GARAGE LIGHT LED - STREET LIGHT LED

  • 52 Watt Base Up LED Prismatic Diffuse Array
  • Universal Voltage 110V-277V
  • 5700 Kelvin – Bright White Light
  • 3700 Photopic Lumens / 5400 Scotopic Lumens
  • 50,000 Hour Life In Enclosed Fixtures
  • 12 Years Life @ 12 Hours Use Per Day
  • 70,000 Hour On Board Cooling Fan
  • Medium Base (Mogul Base Adapter Available)
  • UL Listed LED Lighting Retrofit
  • LM79 Tested by ITT Boulder
  • 5 Year Factory Warranty
  • Diameter: 7.85 Inches  x Depth: 5.85 Inches

 

 

For more information on switching to LED Lighting or pricing, view our website and call Synergy Lighting for a free consultation.

 

Phone: (941)-756-4844

Toll Free: (877) 220-5483

e-mail: sales@synergylightingusa.com
Share/Bookmark

* Energy Savings Based on $0.13 per KWh at 50,000 hours.  Utility Rates May Vary