led wall sconce | Synergy Lighting

MSL Series LED 6 Watt Outdoor Mini Security Lights Save Money

17/05/12 0 COMMENTS

Juno Lighting introduces the new LED Mini Security Light

Are you tired of trying to find an affordable LED product for your outdoor wall fixtures that is affordable, fits and looks good? Finally, one can forget about trying all these funky LED light bulbs because Juno Lighting now offers a dedicated, slim design LED fixture sure to do the job best!

MSL135K12BZPC JUNO LED WALL FIXTURE OUTDOOR BRONZE WITH PHOTO CELL LED FIXTUREThe MSL Series LED Security Light is a small and unobtrusive fixture designed to replace small incandescent and CFL Fixtures. With a shallow profile, the fixture blends in seamlessly with both architecture and nature. The wide light pattern makes this fixture a great choice for commercial and residential applications where an economical LED security light is needed. The MSL Security Light is recommended for mounting heights of up to 8 feet, for installations above doors, balconies, garage and warehouse entrances, and other applications traditionally lighted with incandescent and CFL fixtures.

An Economical and Affordable LED Solution

Using only 6 watts of power, this is the most economical and affordable performance for an outdoor LED fixture of its type. The LED Mini Security Light offers a 60% energy savings over 13 watt CFL’s and a 90% energy savings over 60 watt incandescent fixtures and comes in a beautiful 3500K color. Combined with a long life of 50,000 hour L70 performance, and optional built in photo control, and sleek design, the MSL fixture is a must have for any Condominium, Apartment or Commercial Security application. Made from solid die cast aluminum with a super strong polyester powder coat finish in Architectural Bronze or White, the MSL LED fixture looks great with any exterior design.

The Mini Security LED Fixture offers the latest in Solid State LED Lighting, and comes complete with a Micro-Prism UV Resistant lens that withstands the elements. Light is distributed down and out to illuminate walkways while complying with Dark-Sky full cut off requirements. This leaves properties looking beautiful without wasteful light. The MSL LED fixture comes standard with a 3 year factory warranty. Input voltage is a standard at 120 Volts.

 

LED Replacement For PL Lamps, Incandescent and CFL Bulbs

21/03/12 0 COMMENTS

Often with the changing tides of the lighting industry, customers call us asking for a LED Lighting solution for older 2-Pin CFL and Incandescent applications. Both incandescent as well as magnetic ballast operated compact fluorescent lamps are being phased out, this has become a serious issue.

LED REPLACEMENT FOR CFLCurrently on the market place there are many LED retrofit products such as the plug in lamp pictured here. These products unfortunately have limited use as they are restricted by base types, and can only fit into limited fixture types. Once the right lamp is selected for the type fixture, the lamp relies on typically old worn out sockets which often make for poor electrical connections. As well, these type LED replacement lamps generate a lot of heat which can melt sockets, or pose a risk of fire. Lastly, where dimming is a requirement, this type LED has no options, and therefore become a bad recommendation for commercial use. Fortunately, there is now a true LED Solution!

Universal LED Replacement For PL Lamps, CFL Lamps and Incandescent Light Bulbs

TERRALUX LED RETROFIT MODULEIn 2011, Synergy Lighting participated in the Commercial Use Input to the R&D Department of TerraLUX LED Lighting. Through this input from Synergy Lighting and other Lighting Experts, TerraLUX LED has developed a true universal replacement module for PL and Incandescent Light Fixtures. This module adaptively can replace any type of PL lamp from 2-Pin to 4-pin models and eliminates the need for PL Lamp sockets and ballasts, as well as screw based CFL and incandescent lamps.

The TerraLUX LED Module comes complete with a universal mounting hardware kit that installs in less than 5 minutes in virtually any type of fixture, is UL Listed and IP65 Rated for Indoor and Outdoor use. The adaptive hardware can mount vertically, horizontally, facing upward, downward or outward from any fixture! At only 8 watts, the 4″ LED Module is smaller than a 26Watt PL lamp and has the same light output. Therefore you can replace any 26 Watt Lamp, or a combination of (2) 13 watt PL Lamps, or a 60 Watt Incandescent in fixtures such as Wall Sconces, Recessed Fixtures, Rectangular Floods, Step Lights, Cove Lighting, and many more!

TerraLUX – Best LED Replacement For Commercial Use

REPLACE CFL PL LAMPS WITH LED RETROFIT

The TerraLUX Modules, are available in both 120 and 277 Voltages, and where applicable are pre-wired for 0-10v Dimming circuits. These LED Modules come in 8 Watt-4 Inch, 11 Watt-6 Inch, and 13 Watt-8 Inch configurations, and offer an optional clip on diffuser for sensitive lighting applications. Precise 85CRI Color temperatures include 2700K, 3000K, 3500K and 4000K. Because the milli-amps required to operate these LED’s are low, junction temperatures stay within peak performance ranges. To completely eliminate heat degradation, the TerraLUX module comes with a thermal pad that unifies the module to the fixture body for additional thermal sinking. This makes the TerraLUX Module the most diverse, and universally adaptive 60,000 hour LED Lighting product on the market for use in all commercial applications!

 

call now to order!

TERRALUX LED MODULE SPEC SHEET  TERRALUX IES FILES

 

For more information or to purchase the TerraLUX LED Modules, visit our website https://synergylightingusa.com or call us toll free 1-877-220-5483.